RM250 rm250 starting issues

justincr250 · Dec 26, 2011

bobkyle2:
Haha... I cant find the charger to it ...

Cant get to any local trails... There blocks off by high water... Rode some road though.. About 45 miles... Not one issue....

Hey bro how far are u from Morris

bobkyle2 · Dec 26, 2011

justincr250:
Hey bro how far are u from Morris

About 5 1/2 hours lol

justincr250 · Dec 26, 2011

bobkyle2:
About 5 1/2 hours lol

Damn that's far I was going to say we got good riding spots here

bobkyle2 · Dec 27, 2011

Mike

http://www.thedieselstop.com/forums/f23/trans-temp-tow-haul-218315/index3.html

http://www.rockauto.com/catalog/raframecatalog.php Sensor is 9 bucks there...DORMAN Part # 904238
5R110W; 5-Speed AT

pan gasket... 11 dollhairs...FEL-PRO Part # TOS18714

Mihylo33 · Dec 27, 2011

bobkyle2:
Mike

http://www.thedieselstop.com/forums/f23/trans-temp-tow-haul-218315/index3.html

http://www.rockauto.com/catalog/raframecatalog.php Sensor is 9 bucks there...DORMAN Part # 904238
5R110W; 5-Speed AT

pan gasket... 11 dollhairs...FEL-PRO Part # TOS18714

Yeah thanks.... I found everything... sensor should be here tmro gonna do the filter whiule I'm in there

jackson409 · Dec 28, 2011

Mihylo33:
Yeah thanks.... I found everything... sensor should be here tmro gonna do the filter whiule I'm in there

WTF? somthing wrong with the 6.0 :noidea:

James · Dec 28, 2011

This thread cracks me up.

bobkyle2 · Dec 28, 2011

jackson409:
WTF? somthing wrong with the 6.0

Yeah... Christmas day he texted me and said that his his trans temp went to zero and the OD light was flashing... Throwing a code P0706(i think)..... And then the other morning It started shifting weird..(probably going into limp mode)...

Its probably his temp sensor in the trans... Happens alot on those twucks .... Hopefully that fixes it

James:
This thread cracks me up.

Theres alot of blood,sweat and tears shed in this thread :shocked:

bobkyle2 · Jan 1, 2012

Moved my clip to the 2nd notch .... Wow... Completly different bike :eek:

... Need to play with the jetting a bit more... Its still got a black plug...

Mihylo33 · Jan 1, 2012

bobkyle2:
Moved my clip to the 2nd notch .... Wow... Completly different bike ... Need to play with the jetting a bit more... Its still got a black plug...

I see lots of plugs that are black..... Is it a dry black? If it is chances are its fine what matters is the actual initial plug chop and what the base of the insulator reads.

bobkyle2 · Jan 1, 2012

No.. Its moist...Not soaking wet... ... But I will probably leave it for now.. Because its winter.. And when it comes time were ill be riding all the time i will get it spot on.

jackson409 · Jan 2, 2012

Mihylo33:
I see lots of plugs that are black..... Is it a dry black? If it is chances are its fine what matters is the actual initial plug chop and what the base of the insulator reads.

you see lots of black plugs??? I knew you went both ways didn't figure you for a chocolate lover :lol:

BK as long as it sounds/runs crisp and clean don't FAK with it anymore,,,, ride the dog shat out it for once and leave it alone

bobkyle2 · Jan 2, 2012

It runs ok for now.... Its still choppy like 1/8th throttle... ... Im done with trying to tune it for cold weather..

I got some things to make it look nicer coming in tomorow

2smoke · Jan 2, 2012

Well if its still a little choppy (blubbering) that means your very close (just a hair rich). Which by my standards is good.

Mihylo33 · Jan 2, 2012

probab;y pretty close for sp[ring time settings.... hard to believe spring is just 11 weeks away! :smirk: