Reply to thread

Message

<blockquote data-quote="2smoke" data-source="post: 88032" data-attributes="member: 563">Yes that is a genuine factory service manual. That is exactly what you want and need.&nbsp;Well when you pull the plug is should be visibly wet. Enough that if you wipe it with you finger it should show wet on your finger. So what you need to do now is get that manual! What Im thinking based off of what you just posted you could have a couple of things wrong. Your fuel line or the pick up in the gas tank could have some crap in it, not allowing enough fuel to enter the carb bowl. Or....... your floats are fuel soaked so they ride correctly OR........ your float assmebly didnt get reassembled correctly. OR....... your floats are out of adjustment. You will need your manual to tell you and show you where to measure to and from. Im pretty sure that the setting is 15mm +/- 1mm. But you need the pictures to help show you where to measure it at. &nbsp;So get that manual, its your best friend when it comes to working on your bike. It is truely worth its weight in gold.&nbsp;Oh and the jetting that I told you came out of my 92 service manual based off of a bone stock bike but modified by what Ive learned with my bike. The 91 and 92 bikes are nearly identical. But your 90 might could be a little different in the jetting procedures. So get that manual to make sure that your set up correctly. Plus use the info that FMF sent you for jetting procedures the recommend for the pipe you have on your&nbsp; 1990 RM</blockquote>

[QUOTE="2smoke, post: 88032, member: 563"] Yes that is a genuine fa[B]ctory service manual. That is exactly what you want and need.[/B] [B]Well when you pull the plug is should be visibly wet. Enough that if you wipe it with you finger it should show wet on your finger. So what you need to do now is get that manual! What Im thinking based off of what you just posted you could have a couple of things wrong. Your fuel line or the pick up in the gas tank could have some crap in it, not allowing enough fuel to enter the carb bowl. Or....... your floats are fuel soaked so they ride correctly OR........ your float assmebly didnt get reassembled correctly. OR....... your floats are out of adjustment. You will need your manual to tell you and show you where to measure to and from. Im pretty sure that the setting is 15mm +/- 1mm. But you need the pictures to help show you where to measure it at. [/B] [B]So get that manual, its your best friend when it comes to working on your bike. It is truely worth its weight in gold.[/B] [B]Oh and the jetting that I told you came out of my 92 service manual based off of a bone stock bike but modified by what Ive learned with my bike. The 91 and 92 bikes are nearly identical. But your 90 might could be a little different in the jetting procedures. So get that manual to make sure that your set up correctly. Plus use the info that FMF sent you for jetting procedures the recommend for the pipe you have on your 1990 RM[/B] [/QUOTE]

Verification