Reply to thread

Message

Sir's you're all right. What is Stopping the Lifter Rod in the Main Shaft. I could Drill a Small Hole in the Shaft and use an Extractor to Pull it out, BUT that would most likely Destroy the Lifter Rod. I could all ways get a new one. And your also right about taking the Clutch apart, to get at the Lifter Rod. That wouldn't help there's still Main Shaft there. Wait till the weekend, I'll get the Air 1/2" Impact Wrench. See what that will do. Possibly Safety Wire the Lifter Rod end and Pull it Out.

[QUOTE="CYKSxx7, post: 216138, member: 3613"] Sir's you're all right. What is Stopping the Lifter Rod in the Main Shaft. I could Drill a Small Hole in the Shaft and use an Extractor to Pull it out, BUT that would most likely Destroy the Lifter Rod. I could all ways get a new one. And your also right about taking the Clutch apart, to get at the Lifter Rod. That wouldn't help there's still Main Shaft there. Wait till the weekend, I'll get the Air 1/2" Impact Wrench. See what that will do. Possibly Safety Wire the Lifter Rod end and Pull it Out. [/QUOTE]

Verification