Reply to thread

Message: <blockquote data-quote="jackson409" data-source="post: 32799" data-attributes="member: 381">This is the first thing I would do as it is easier and cheaper in this order.   Oh and what are you mixing your premix at and what octane fuel are you using? 1. Take off air filter and clean and or replace.2. Take off carb and remove jets, note what jets are and inspect and clean.3. set float height.4. install new plug.5. remove pipe, inspect and clean out if necessary.6. Take off silencer and repack.7. compression test.8. install new top end. Do these things in this order and report your findings and we go from there.</blockquote>