Reply to thread

 

 

To change the oil.... There is a drain plug on the bottom of the engine. You will have to drain that....

Then on the side of the engine under neath the oil fill cap. There should be like a 10mm headed bolt, That is the fill sight hole.

Pour oil into the fill hole at top... Intill the oil pours out of the sight hole. Bike should be standing straight up and down.

 

Now... When i said oil... I mean oil or transmission fluid.... You can use either.... The oil needs to be ok for a wet clutch system. Most autozones and what not will have Mobile oil for motorcycle... That works well also.


Top