Reply to thread

Message: <blockquote data-quote="2strokesteve89" data-source="post: 182725" data-attributes="member: 1670"><p>Matco and snap on vantage pro.....I guess my whole point was for example that if you show a non active circuit that may have one strand of wire connecting it at one point show continuity. and then put a load on the circuit the weak connection would certainly fail, if though I checked the circuit live with a voltage drop test. I would find the problem very quickly,it has nothing to Do with my ohm meter but everything to do with how I check for faults. I know this has almost nothing to do with the OP's issue, just trying to clarify the point I was making as I was winding down the rabbit hole.</p></blockquote><p></p>