RM250 RM 250 ‘06 Rebuild
- Thread starter davlewjenkins
- Start date
-
- Tags
- rebuild rm250 two stroke
cbeck your grounds man if you’ve taken care of everything else.....
I just wanna hear 2T ffs
I hear you!!! Me too!!!! Hopefully today, checked all I could with no luck, calling in some more experienced reinforcements
Checked that and re-sanded just to make sure its earthed 110%, checked the coil that was fine but still no spark, going to have to dig around down below and hope its not the CDI. Starting to think this bike is cursed
Weird, they’re usually a pita coming out if the thread has rusted,
Does it screw in without the shroud in place?
Not too often a cdi goes bad!
Hence my growing belief in this thing being curses
Hopefully next week brings better news
Nice build, I play around restoring old bike also.
It's not anywhere near as straightforward as I hoped! This is my first, hopefully more to come. Ever done an RM Palmer?
Not a restoration, rebuilt a buddies 125 engine.
There's a good chance I'll be re-doing this motor in the near future, top end is fine but bottom end is going to need to be done. Might be pinging over some SOS signals haha
Found the culprit, stator was toast! This bike must've really been through hell before I got it. Sent for a recon, no stock of the component in SA from Suzuki and mad over priced to order it
With the stator off we felt the some play on the bottom end, lucky fella aren't I. Going to re-do bottom end whilst we down there. My quick rebuild has turned into a total flippen overhaul haha. Someday I'll ride this bike....
