RM250 rm250 starting issues

Andrewaust

Andrewaust

bobkyle2:
If you have one.. Or can get your hands on one cheap... you should try a kick start off like a 2003 RM ....
Click to expand...



Thanks for the info on the 03 RM Kick starter, might pass it by Graham who has the local Suzuki shop, nothing worse then a shithouse kick starter, especially stuck on a hill and the lever wants to go be 30deg more then it should :banghead::rant:



A :wink:
 
bobkyle2

bobkyle2

FxCam_1330653137171.jpg

FxCam_1330653034147.jpg

FxCam_1330652564122.jpg

FxCam_1330653120544.jpg

FxCam_1330653110232.jpg

FxCam_1330652483132.jpg

FxCam_1330653157481.jpg

FxCam_1330653015503.jpg

FxCam_1330652543368.jpg

FxCam_1330652523352.jpg

FxCam_1330652620121.jpg


New Turbin core and Pro circuit works pipe sounds AMAZINGGG .... Lost a little on low end... Fresh fuel .. And it started in 2 kicks...Got my jetting dialed in perfect... But i think i either need a different needle.. Or move it to the first slot... I moved it from the middle one.. to the second one.. And it helped tons..... I read where eric gore reccomends a different needle all together... So i will probably Order one of those tonight or tomorrow.... Gotta order a couple oem bolts too..... Started to put my flywheel weight on.. And my impact was dead .... Soooo I'll get to that tomorrow...
 
Mihylo33

Mihylo33

I'm the creator of the "Bitch'n Kitchen" and the "Reddiwip" thread..... who's Jelly?

So with a cut cylinder ( I just read that 4 posts back) then you should be running race gas for sure as it is an actual SX bike.
 
Mihylo33

Mihylo33

bobkyle2:
YUUUUUUUUUUUUUUUUUUUUUUUUUUUUUPPPPPP .... Thats what i run
Click to expand...


Didnt we have this discussion last year???? what happened then? could have saved millions of dollars in therapy for the rest of the DBA group... I on the other hand have no need for therapy as I was born this way...
 
Top