Yz 125 shock is stiff

2strokesteve89 · May 31, 2015

I beat them off......oh yeah, don't forget the lube.

PALMER84ONE · May 31, 2015

2strokesteve89:
When I beat off......oh yeah, don't forget the lube.

You do know this is about bearing removals in a swing arm, right? :smirk:

ossagp · Jun 4, 2015

Maybe he uses it for bearings (too).

2strokesteve89 · Jun 5, 2015

ossagp:
Maybe he uses it for bearings (too).

Yeah.

timoyz · Jun 5, 2015

PALMER84ONE:
You do know this is about bearing removals in a swing arm, right?

You seem to forget one 94ish RM Rebuild Thread. :panic:

Lgwillie · Jun 8, 2015

Update* I ended up buying a wishbone with new bearings for 33 because I ended up warping the metal on the wishbone lol. But everything else went together smoothly. The swingarm now travels Up the whole way with no notches. I'm very pleased and all I have left are a couple bolts, but I'm about to die from all that work. But I'm certain that the suspension is fixed. And thanks everyone for the tips and advice. Without you guys I would be as lost as a dog with 2 dicks

timoyz · Jun 9, 2015

SO......

Did you get the swing arm off also, and get ALL of the bearings in your rear suspension and shock greased? If so, now do your steering stem, before it has to be replaced, then clean your carb. :smirk:

PALMER84ONE · Jun 9, 2015

timoyz:
SO...... Did you get the swing arm off also, and get ALL of the bearings in your rear suspension and shock greased? If so, now do your steering stem, before it has to be replaced, then clean your carb.

Don't forget to adjust your float, and tighten the screw between the seat and handlebars.

Mihylo33 · Jun 9, 2015

timoyz:
SO...... Did you get the swing arm off also, and get ALL of the bearings in your rear suspension and shock greased? If so, now do your steering stem, before it has to be replaced, then clean your carb.

PALMER84ONE:
Don't forget to adjust your float, and tighten the screw between the seat and handlebars.

Don't forget your manual! :prof:

Lgwillie · Jun 10, 2015

Mihylo33:
Don't forget your manual!

I have it

Lgwillie · Jun 10, 2015

PALMER84ONE:
Don't forget to adjust your float, and tighten the screw between the seat and handlebars.

How do I adjust the float and why do I need to. I have it all back together now and my suspension feels great. I also bought klotz Benol premix and I mix it at 32:1

timoyz · Jun 11, 2015

Waiting for the response to my post. :foottapswhilest: :whistle:

jackson409 · Jun 11, 2015

Lgwillie:
How do I adjust the float and why do I need to. I have it all back together now and my suspension feels great. I also bought klotz Benol premix and I mix it at 32:1

its in the manual you have.

PALMER84ONE · Jun 11, 2015

Mihylo33:
Don't forget your manual!

Lgwillie:
I have it

Lgwillie:
How do I adjust the float and why do I need to. I have it all back together now and my suspension feels great. I also bought klotz Benol premix and I mix it at 32:1

timoyz:
Waiting for the response to my post. :foottapswhilest:

jackson409:
its in the manual you have.

Lgwillie · Jun 11, 2015

timoyz:
SO...... Did you get the swing arm off also, and get ALL of the bearings in your rear suspension and shock greased? If so, now do your steering stem, before it has to be replaced, then clean your carb.

Yes I got all that done. Just didn't mess with the Carb and steering stem